Citroën CX

Citroën CX  

I own a 1980 Citroën CX Athena. As I got involved in the "CX world" it appeared that some items are becoming scarce. Therefore I started producing some (rubber) parts. These parts are available through the Dutch Citroën CX club: magazijn@citroen-cxclub.nl

Another possibility is contacting me (for instance using Linked in) 

The items shown here are produced in small batches. The production speed is low due to the choosen production methods that fit the small amounts of parts needed. So large orders are out of the question... Please understand that I am NOT using high pressure injection molding for the rubber parts. It is more like a casting process. There can be imperfections like an air buble thas was filled later by me after the rubber part was released from the mold.   

Dust boot for the track rod end ball joint:

 

 

 

 

 

 

 

 

 

 

 

 

 

This dust boot will fit all CX models. It is the rubber boot only. The internal steel ring, the external clamp spring ring and elastic are not provided. These items have to be taken from the existing part. Citroën did not sell these dust boots seperately. So there is no Citroën number for these dust boots. These dust doots will fit the track rod end ball joints of part numbers 5 462 707; 5 462 708; 95 493 378; 95 606 878; 95 606 877; 95 493 376; 95 606 879; 95 493 377; 95 606 879; 95 606 880. The dust boot is made of 2 component polyurethane rubber.

 

Dust boot for the upper ball joint (front suspension)

 

 

 

 

 

 

 

 

 

 

 

 

 

The picture above shows on the left the replacement dust boot, on the right the original (torn and deformed) Citroën dust boot. The replacement dust boot will fit all CX models. It is the rubber boot only. The internal steel ring, the external clamp spring ring and elastic are not provided. These items have to be taken from the existing part. Citroën did not sell these dust boots seperately. So there is no Citroën number for these dust boots. These dust doots will fit the upper ball joint with part number 3MA 5 429 314. These boots are not made by me but are supplied by an OEM supplier. These boots are meant for another vehicle, but are a perfect fit for the Citroën CX.


Ventilation/heater air bellow for models up to (about) 1978:



 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Citroën part number 6MA 5 444 069. The bellow is made from 2 component polyurethane rubber.

 

Licence plate holder CX 1979-1985

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Citroën part number 6MA 95 541 257. The licence plate holder is made from glass fiber reinforced epoxy. It uses a black gel coat. The rear side is therefore "rough" in appearance. But this is not visible when the part is mounted on the car. The outside has a coat of anti stone chip that also serves as a UV protection.